Gmc Sierra Parts

Gmc Sierra Parts questions and answers

Check out the GMC Sierra For Sale at LemonFree.com Cars.

Q: on the 2002 gmc sierra, is the oil pan attached to the transmission or any other parts?
Need to know before I start to pry it loose with a putty knife or screwdriver as suggested from answers-thanks in advance

A: No, the pan is attached only to the engine block.

Q: Why do the brakes on my 96 GMC Sierra p/u momemtarily pull left when applied?
Pulls left at first then straightens itself. The more intense the braking the harder the pull. Always straightens itself back out. Is this a proportioning valve, collapsed right side brake hose, stuck right side caliper or something else? How do I diagnos with out just randomly replacing parts in hopes of solving the problem?

A: Most likely a bad brake hose on a gm truck.

Q: 1999 GMC Sierra how to remove passenger bed panel??
I ran into a pole in my 1999 GMC Sierra 1500 Z-71, and when I went to the body shop, they said it would cost $2200 to fix. I found the whole new panel at AutoPartsTrain for $550, and they guarantee quality and fit. My question is, how do you change out just that passenger panel on the bed?? Is it welded on to the rest of the bed or can the parts be seperated? The parts place sells just that side panel so I'm assuming that it's not that hard to change. Does anyone know??

A: as far as i can remember, most truck bed panels have a series of spot welds all around the the panel. in order to remove the panel you will have to drill out all of these spot welds. then take a narrow tip flat chisel to seperate it from the inner frame structure. after that grind down all of the weld spots and flatten back out where you seperated the panels from. get your new panel and make sure that it lines up properly. take several clamps and clamp it on tight. then with a mig or tig welder start welding the panel back in at all the same spots. it is a time consuming job, but if you pay attention and take your time doing it, its not that hard of a job.

Q: 1978 GMC Sierra Grande?
I have recently acquired a 1978 Gmc Sierra Grande and I need to find parts for it. Parts means the cab, the bed the hood etc. I would also like to have as much info about them as possible. When we had a 68 impala a while back there was a site strictly for them. If you know anything like this please let me know.

A: I own a shop, and do a lot of restoration work. The site you want is www.chevyduty.com/ You should be able to get what you need from them. Glad to help out, good luck!!!

Q: Z71 sierra 4x4 GMC? How do i replace a balljoint?
i'm thinkin of purchasing a Z71 sierra 4x4 GMC for $950. it has 179k on it and it needs a new ball joint and a power steering pump. is this a good deal and how much would these parts cost and how hard would it be to put them in?

A: if its in good shape that's is a nice deal if you have experience balljoint's are easy steering pumps need a tool to pull off the pulley i say get it if you can fix those things

Q: Does anybody know the name of the techno song from the new GMC Sierra TV Commercial?
It's the one with where they outline parts of the truck in little mock-pixels and boast the towing capacity of the vehicle. PLEASE respond. Next step is to call GMC

A: Check these sites out for info on music in commercials... http://www.adtunes.com/ http://www.songtitle.info/

Q: GMC truck body parts?
hello, i have a 2001 gmc sierra 2500hd crew cab. i had a skid of cement buckets slide into my cab and it dented the panel below the rear window. i have no idea what it is called. does anyone know what it is called and possibly how much it will cost to buy a new one? ( i know i will have to drill out spot welds and take the bed off, but i have all the tools to do it) thank you.

A: www.LMCtrucks.com, or salvage yard.

Q: Help on a 1997 GMC sierra 1500?
i was doing some work on my 1997 GMC sierra today and i was wondering where i could go online to find a parts list because my dad lost the owners manual. I also removed the black thing that hangs under the bumper (i call it the skirt) will that affect anything?

A: what is it your looking for? I have Mitchell, Alldata and GM Techline here. my bad flag troll is back. lol

Q: GMC Sierra Vs. Sierra XC?
Hi i have a 1997 GMC K1500 5.7l, 3 door, stepside. As im looking through the parts online it asks me if my truck is a sierra or sierra xc, what is the difference? What does xc stand for? How can i tell if my truck is an XC or not? Thanks!

A: purple

Q: Replacing two piece driveshaft centre support 88 gmc?
Replacing two piece driveshaft centre support 88 gmc? Does anyone have any tips on how to replace this part in a 88 gmc sierra ext pick up truck im going to attempt to do it myself yeaa. p.s. and if anyone could tell me why this might have failed thank you everyone Additional Details 6 hours ago What if i replace the entire shaft with one from another vehicle same make model would that work

A: If you are replacing the entire shaft with the same type and out of essentially the same truck yes it will be fine, to replace the carrier bearing only separate the two halfs and then press the bearing off in a press supported with a bearing separator, you will need to press the new on on as well.

Q: how do i change my oil pressure switch on my 1999 gmc sierra 5.3litre?
i need to know what all parts i have to move out the way so i can be able to reach in the back.

A: buy a step by step haynes or chiltons manual $25 when you are buying the new switch at the parts store